SIZING TOOL INSTRUCTIONS

Step 1: Check Your Fit
Wrap the bracelet around your wrist and determine how many links need to be removed for a comfortable fit. We recommend leaving enough room for the bracelet to move slightly without feeling loose.

Step 2: Identify the Pin Direction
Look closely at the side of the bracelet links and locate the removable connecting pin. Identify the slightly rounded or recessed end of the pin. This is the side where the sizing tool should apply pressure.

Step 3: Position the Bracelet
Open the bracelet sizing tool and place the bracelet securely into the tool. Align the tool's push pin directly with the bracelet pin you want to remove. For easier adjustment, start with links near the middle of the removable section.

Step 4: Push Out the Pin
Hold the bracelet steady and slowly turn the adjustment knob. Continue turning until the bracelet pin begins to come out from the opposite side.

Step 5: Remove the Pin
Turn the sizing tool back slightly and remove the bracelet. Carefully pull the exposed pin out with your fingers. If needed, use a small pair of pliers for extra grip.

Step 6: Remove the Required Links
Remove the number of links needed to achieve your preferred bracelet length. Multiple links can be removed from the same section when necessary.

Step 7: Reconnect the Bracelet
Bring the remaining bracelet sections together and align the pin holes. Insert the connecting pin back into the bracelet, starting with the rounded end.

Step 8: Secure the Pin
Gently press the pin back into place using the sizing tool or a firm, flat surface. Make sure the pin sits flush with the bracelet and does not protrude from either side.

Tip: Make small adjustments first. Removing too many links at once may make the bracelet feel too tight.

ENJOY YOUR PERFECT FIT

Your Wollet bracelet is now ready to wear comfortably.

For questions about sizing or adjustment, please contact the Wollet Customer Support Team.